Pressure vessel P24DF, heavy wall*, with inner tube, protective covering, PTFE-coated O-ring

Heavy wall inner tube has a 4mm hole at the side wall. When the inner tube is pressed down, the interior of the pressure vessel connects with its exterior. When the inner tube is lifted up, the inside and outside disconnect from each other. The exterior of the pressure vessel is coated with a high-quality coating material, which avoids the risk of the product bursting during the experiment and thus increases the safety of the experiment. The complete apparatus is supplied with vessel, PTFE bushing and O-ring. * Please note: The pressure vessels are made from heavy wall borosilicate glass 3.3 tubing and can be used under normal conditions for applications with pressures of up to 3 bar. Due to the properties of the coating material, the surface may yellow after use, which does not impair its use. The coating must be used between -40°C and 80°C; excessive temperatures will melt the coating. Important warnings for glass pressure vessels: Due to varying conditions of use (corrosive solutions, temperatures, duration), we cannot guarantee that the glass vessels will withstand the pressure. Evacuate or pressurise the pressure vessels slowly. Carry out a careful visual inspection of the pressure vessels before every use. Scratches cause a severe loss of stability and can lead to consequential damage. Please observe all safety precautions and always work behind a safety shield.